Simple Methods To Install A New MP3 USB Car Radio In Mazda 6
February 26, 2010 by Sally Thompson
Filed under Vehicle
How to Remove the Radio From a Mazda 6? Mazda six is one of the most popular cars available in the market all over the world. Mazda six comes with a default factory audio system. This system is of very high quality and performance. There is no need to change the audio system in this car. But still people do change it to upgrade their audio system to have powerful stereo and speakers. In particular youngsters are mad about powerful audio system and speakers. So, in order to upgrade your default audio system in Mazda six car you have to first remove the default stereo present in it. If you go to a mechanic or an engineer they may demand you big amount of money. You can save money and your time by doing this work on your own.
This article lists you all the required things to remove the default audio system from your mazda six car and also it also explains the step by step procedure to remove the stereo safely from your car. The procedure mentioned below holds good only for the two thousand three to two thousand eight car models.
The things you will be in need are pliers, screw driver and socket wrench. Make sure you have screw drivers of different sizes. If you do not have screw drivers of different size then you may be stuck in the middle. Make sure all these things are ready before starting your work to avoid unnecessary wastage of time.
The next thing is to remove the shift knob of the gear. The knob can be removed by twisting it in the counter clockwise direction. The center of the console can be snapped off. Then, the cupholder is removed by grabbing on it. This console generally extends in to ashtray of the car. Once the console is removed, there are two other screws that become visible. Remove these screws. It is actually below the panel of climate control.
Once the console is removed completely you can see two screws. These screws are removed using appropriate screw drivers. These two screws can be found at the bottom side of the weather controlling panel.
The glove box is removed and the next moment the radio is made accessible. The sides of the glove box is squeezed and then dropped down. Now you will find a ten mm bolt on the left side. This bolt is removed carefully.
After the radio is removed, do the above steps in the reverse order to assemble the parts. The dash is placed and all the screws are screwed back. The gear is then shifter in to the park mode. The battery of car is again reconnected. The negative wire is again placed on the battery and tightened.
This article therefore throws light on all aspects of removing the battery and the radio. It is essential to remove the battery to prevent any case of short circuit in the car while working on this removal. Now you know how to remove the radio from Mazda 6.
Want to find out more about Radioblende, then visit Author Name\’s site on how to choose the best radio installation kits for your needs. Get a totally unique version of this article from our article submission service